Quick Answer: How To Replace Elastic In Men’s Pajamas?

How do you replace worn elastic?

How to Replace the Elastic in Elastic-Waist Pants

  1. Check the waistband for places where the elastic is sewn in.
  2. Open up a hole in the elastic casing.
  3. Pull out the elastic, and cut it to size.
  4. Thread the elastic back into the waistband.
  5. Sew the ends of the elastic together.
  6. Sew the hole in the casing closed.

Can you fix stretched elastic?

You can tighten an elastic strap without replacing it. Tightening an elastic strap can also make a garment fit a smaller person. Before you tighten a strap be sure there is still some stretch left in the elastic. Elastic that no longer stretches will have to be replaced.

Can you replace elastic in pants?

Do you have pants or skirts with worn-out elastic? If you want to replace the elastic in the waistband, measure for new elastic. Use new elastic about the same width as the worn elastic. You may be able to use the elastic from the top of worn-out panty hose.

Can you replace elastic in shorts?

Find where the old elastic is sewn into the pants and cut a hole large enough to take out the old elastic and insert the new. You may need a seam ripper to detach the elastic from the pants. Be careful to not rip through the pants while removing the elastic. Attach a safety pin to one end of the new elastic.

You might be interested:  Often asked: What Type Of Cotton Is Softest For Pajamas?

How do you join elastic?

How to join narrow elastic ends together? To join narrow elastic ends, either you knot them and seal with a clear nail polish or overlap the ends and sew them. Fabric can also be added to join the elastic ends with a zigzag stitch.

How long should waistband elastic be?

To get the appropriate length of an elastic waistband, deduct two inches from your waist size. This is the length of elastic that you need for your waistband. This allows your waistband room to expand and fit you snugly once you fix it in your pants.

How can I permanently stretch elastic?


  1. Turn on the iron and dampen a cloth. You want your iron on and set to the highest setting.
  2. Prepare your pants. You can either pin each side of your pants to the ironing board—stretched to the desired length.
  3. Place the damp cloth over your elastic.
  4. Iron the elastic.
  5. Repeat as necessary.

Can you shrink an elastic band?

Although rubber bands seem to never lose their shape or elasticity, you can shrink them by applying heat. Use a hair dryer to blow hot air on the rubber band. Watch the rubber band shrink as the weight is actually being pulled by the rubber band.

Leave a Reply

Your email address will not be published. Required fields are marked *